WERTEC – brand from PolandSold through distributors and resellers
ENROEL
Where to buy WERTEC?Find a distributor →
WT877 Cordless Tile Vibrating Suction Cup with Hammer Mode
WT877 Cordless Tile Vibrating Suction Cup with Hammer Mode – image 1WT877 Cordless Tile Vibrating Suction Cup with Hammer Mode – image 2WT877 Cordless Tile Vibrating Suction Cup with Hammer Mode – image 3
Code: WT877 · EAN 5901721737808

WT877 Cordless Tile Vibrating Suction Cup with Hammer Mode

Two modes – continuous and hammer-vibration – six levels, Ø 130 mm pad, 50 kg, two 16.8 V 2000 mAh batteries.

  • 2 modes: continuous and hammer-vibration
  • 6 vibration levels
  • 2 × 16.8 V 2000 mAh batteries, approx. 2 h fast charging
  • 50 kg capacity, Ø 130 mm pad
  • Approx. 1.8 kg, one-hand lever

Available through WERTEC distributors. Send an enquiry – we will tell you where to buy in your country.

WT877 presses the tile into the adhesive and spreads it evenly under the whole surface, removing air pockets. It has two modes: continuous for standard bedding and hammer-vibration – stronger, pulsing vibration for thick adhesive and large-format tiles.

The tile is held mechanically by the lever, not by the battery. Rubber can leave round marks on some glazed tiles – test first or work through a PTFE pad or film.

Related products