3 sizes · WERTEC
Diamond Core Bits for Drilling and Grinding M14
Drill with the face, mill and grind with the side – one tool for holes and edge shaping in tiles and stone.
- Drilling and milling with one tool
- Edge grinding
- Brazed diamond, 60 mm length
- M14 thread
Available through WERTEC distributors. Send an enquiry – we will tell you where to buy in your country.
These bits drill holes in ceramic tiles, porcelain stoneware, granite, marble and stone, and mill and grind the edge with their side. If a fitting turns out slightly larger, widen the hole with the side of the same bit; shape the edges of stone cladding. M14 thread, total length 60 mm.
Sizes and codes
| Code | Diameter | EAN |
|---|---|---|
| WTAR12 | 12 mm | 5901721737075 |
| WTAR25 | 25 mm | 5901721737082 |
| WTAR35 | 35 mm | 5901721737099 |
| Code | Diameter | EAN |
|---|---|---|
| WTAR12 | 12 mm | 5901721737075 |
| WTAR25 | 25 mm | 5901721737082 |
| WTAR35 | 35 mm | 5901721737099 |
| Mounting | M14 thread (angle grinder) |
| Total length | 60 mm |
| Diamond | brazed, wear-resistant |
| Functions | face drilling, side milling and grinding |
| Materials | porcelain stoneware, ceramic tiles, granite, marble, stone |
| Brand | WERTEC |
Related products
BLUE Fine-Grit Diamond Core Bits M14 for Porcelain
Via distributorsDetails →
TurboSpeed Diamond Core Bits M14 for Porcelain (6–110 mm)
Via distributorsDetails →
MATRIX Diamond Core Bits M14 with Two Diamond Grades
Via distributorsDetails →